From: Patrick.Valla (Pat.de.Lyon@wanadoo.fr)
Date: Mon Oct 28 2002 - 20:46:44 EET
Hello!
Don't forget to compare the mm 3 per min, beetwen a rapid prototyping
machine and a High Speed Machining Centre.
Yes I know it's not the same work and not the same goal ;but ...
A french user Patrick.
Regards
----- Original Message -----
From: "PT Mativenga" <P.Mativenga@umist.ac.uk>
To: <rp-ml@rapid.lpt.fi>; "Venkatesh Gandhi" <rpfdm@yahoo.co.in>
Sent: Thursday, October 24, 2002 11:10 AM
Subject: Re: Speed of the Machine - Reg
> Well the value you have quoted for the SLS machine seems too
> high - 7.5m/sec = 450m/min. That is more than ten times the rapid
> traverse speed of a good 40m/min High Speed Machining Centre.
>
>
> Regards
>
>
> Paul
>
>
> On 24 Oct 02, at 5:18, Venkatesh Gandhi wrote:
>
> Date sent: Thu, 24 Oct 2002 05:18:28 +0100 (BST)
> From: Venkatesh Gandhi <rpfdm@yahoo.co.in>
> Subject: Speed of the Machine - Reg
> To: rp-ml@rapid.lpt.fi
>
> >
> > Hi Friends,
> >
> > I found the speed of the Fused deposition modeling machine as 26mm/sec
and the solidification rate as 0.1 sec
> >
> > And also for Selective laser sintering machine - Speed = 7.5 m/sec
> >
> > Can any body conform this value.
> >
> > G.Venkatesh
> >
> > Post your ad on Yahoo! India Autos.Check out the used Maruti, Fiat and
Ford models on sale now.
>
>
>
> Dr P T Mativenga
> Lecturer
> University of Manchester Institute of Science and Technology
> Manufacturing Division
> Department of Mechanical, Aerospace and Manufacturing Engineering
> Sackville Street, Main Building
> P O Box No. 88, Manchester M60 1QD
> United Kingdom
>
> Tel 0161 200 3821 (overseas) 44 161 200 3821
> Fax 0161 200 3803 (overseas) 44 161 200 3803
> Email P.Mativenga@umist.ac.uk
>
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:14:30 EET