Re: duraform

From: Timothy J Gornet (tim.gornet@louisville.edu)
Date: Tue Apr 02 2002 - 20:50:03 EEST


Cyanoacrylate usually works quite well. I would try tacking it together
with some thick CA and use the accelerator on it so it cures
immediately.. You can then fill in between the tack "welds" with the
thinner (more liquid) CA with the accelerator.
 
Good luck.
 
 
 
Tim Gornet Computer Aided Engineering Consultant
INTERNET: tim.gornet@louisville.edu
SLUGNET: Vogt Bldg. Rm 101, University of Louisville, Louisville, KY
40292
PHONENET: (502)852-0714 FAXNET: (502)852-8890
Rapid Prototype Center

For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/



This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:13:39 EET