Since I will not do the library search for you I will provide the
following. Let me know if any are missing.......
No I will not copy and send them to you........sorry but that's life.
Elaine
YearTitle of PublicationAuthor(s)
1989A common test part-whatamacallitR. Aubin
1990Stereolithography Process AccuracyEdward Gargiulo
1990Common Test Part for Accuracy StudyEdward Gargiulo
1990Stereolithography Process Accuracy: User ExperienceEdward Gargiulo
1991A Study of Stereolithography Uniformity and RepeatabilityDouglas Van Putte
1991On the Structure/Properties relationships in Photoinitiators of
PolymerizationJP Fouassier
1992On Windowpanes and Christmas-Trees: Diagnostic Techniques for Improved
Part AccuracyHop Nguyen, Jan Richter, Paul Jacobs
1992Surface Finish in Three Dimensional PrintingTailin Fan, Alan
Lauder,Emanual Sachs, Michael Cima
1992Improving Stereolithography Part Quality Practical SolutionsJinghong Li
1992Stereolithography Process Accuracy: Further User ExperienceEdward Gargiulo
1992Rapid Prototyping Technology: Benchmarking ComparisonL. D. Schmidt
1992A Benchmarking Comparison of Commercial Techniques in Rapid
PrototypingL. D. Schmidt
1992Chrysler Compares Rapid Prototyping SystemsT. Wholers
1992Reduced Distortion in Optical Freeform Fabrication with UV LasersEJ
Murphy, RE Ansel, JJ Krajewski
1992Stereolithography Accuracy and Photosensitive MaterialsR. Peiffer
1992User Accuracy Study- Update and Future PlansE. Gargiulo
1993Stereolithography 1993:Resins, Part Accuracy and Investment CastingDr.
Paul Jacobs
1993An Experimental study of the parameters affecting Curl in parts created
using Stereolithographyl. Horton, E. Gargiulo, M. Keefe
1993Epoxy Resin LMB 5302 User Part Accuracy and Optical Creep TestThomas Pang
1993Status of In-Plane Accuracy Benchmark ProgressE. Gargiulo
1993Measurement Results of Benchmark PartsC. Atwood, G. McCarty, A. Bryce
1994Benchmarking Rapid Prototyping for use in ManufacturingChris Hicks
1994A comparison of rapid prototyping processesNP Juster, THC Childs
1994Aspects of Process Optimization for StereolithographyD. Kochan
1994A new user part for performances evaluation of rapid prototyping
systemsL. Iuliano, R. Ippoloto, A De Filippi
1994Optimizing materials and process parameters for different rapid
prototyping applicationsMike Shellabear
1994A worldwide assessment of rapid prototyping technologiesR. F. Aubin
1994Benchmarking of Rapid Prototyping Systems: Beginning to Set StandardsD.
Jayaram, A. Bagchi, C. Jara-Almonte,
1994Benchmarking of Rapid Prototyping Systems: Beginning to Set StandardsD.
Jayaram, A. Bagchi, C. Jara-Almonte, S. O'Reilly
1994Characterization of the Rapid Prototyping Build ProcessK. Newsome, J.
Kirstein, W. Kennedy
1994Studies in Stereolithography: Influence of Process Parameters on Curl
Distortion in Photopolymer ModelsS. Jayanthi, M. Keefe, E. Gargiulo
1994Studies in Stereolithography: Effects of Process Parameters on the
Accuracy of Photopolymer Solid ModelsSuresh Jayanthi
1995Investigation into the influence of material and process on part
distortionB Wiedemann, K. H. Dusel, J. Eschl
1995Multiobjective optimization of part building orientation in
StereolithographyW. Cheng, JYH Fuh, AYC Nee, YS Wong, HT loh, T. Miyazawa
1995Benchmarking of Rapid Prototyping Techniques in Terms of Dimensional
Accuracy and Surface FinishIppolito, R., Iuliano, L. & Gatto, A
1995Layer position Accuracy in powder based rapid prototypingSJJ Lee, E.
Sachs, M. Cima
1995Benchmarking- Selecting your systemPeter Marks
1995Rapid Prototyping and 3D CAD systems: The Need for benchmark support
based on case studiesIan Gibson, Steven R. Hanekroot
1995An Error Compensation Strategy for Replication by Rapid PrototypingML
Philpot, PA Green
1995Expert System-based selection of the preferred direction of build for
rapid prototyping processesD. Frank, G. Fadel
1995Mechanical Properties Evaluation of Stereolithographic
PhotopolymersSuresh Jayanthi
1995Adaptive slicing of parametrizable algebraic surfaces for Layered
ManufacturingKulkarni, Prashant; Dutta, Debasish
1995 Recoating issues in stereolithographyRenap, K.; Kruth, J.P.
1996Structural quality of parts processed by fused depositionMukesh
Agarwala, Vikram Jamalabad, Noshir Langrana, Ahmad Safari, Phillip Whalen,
Stephen Danforth
1996Advances in Part AccuracyBedal, B. & Nguyen, H.
1996Creating a Database of Rapid Prototyping System CapabilitiesCampbell,
R.I. & Bernie, M.R.N
1996Accuracy Issues in CAD to RP translationsGeorges Fadel, Chuck Kirschman
1996Improvement of part accuracy-investigations into the basics of
photopolymerisationKH Dusel, J. Eshl, E. Wisemann
1996Investigation on Stereolithography accuracy on both massive and
quickcast partsA. Carosi, L. Iuliano, L. Settineri
1996Issues in fabricating manufacturing tooling using powder-based additive
freeform fabricationPaul, B.K. & Baskaran, S.
1996Principles of optimization of Laser assisted systems for rapid
prototyping and manufacturingVP Veiko, SA Rodionov, BP Timofeev, AT
Shakola, AK Kromin
1996Investment Casting Tooling ProjectAlmond, H.
1996Surface Deviation Modelling of LMT Processes - a Comparative
AnalysisReeves, P.E. & Cobb, R.C.
1996ACES Build Accuracy of the Kodak Benchmark MoldDouglas Van Putte
1996Stereolithography Accuracy : Past, Present, and FuturePaul Jacobs
1996Effects of Pre-dip Delay on Print ThroughKamesh Tata
1996Benchmarking the application of quality function deployment in rapid
prototypingGhahramani, Bahador
1996Influence of process parameters on stereolithography part shrinkage
Wang, W.L.; Cheah, C.M.; Fuh, J.Y.H.; Lu, L.
1996 Experimental design and analysis of in-plane processing accuracy for
SSM processWang, Wanlong; Feng, Wei; Yan, Yongnian; Fuh, Jerry Y.H
1996Computational methods for rapid prototyping of analytic solid
modelsFarouki, Rida T.; Konig, Thomas
1996Investigation of the effect of various build methods on the performance
of rapid prototyping (stereolithography)Williams, R.E.; Komaragiri, S.N.;
Melton, V.L.; Bishu, R.R.
1996Basic powder metallurgical aspects in selective metal powder
sinteringKruth, J.-P.; Van der Schueren, B.; Bonse, J.E.; Morren, B.
1997Process selection criteria for rapid prototyping and the implementation
of a decision support systemBown, M.
1997Material properties and fabrication parameters on selective laser
sintering processIan Gibson, Dongping Shi
1997benchmarking Various Methods of Rapid Prototyping SystemsJ P Harrison
1997Uquantification of Downfacing Z-Error Part IIKamesh Tata
1997Optimizing the use of Stereolithography PhotopolymersBronson Hokuf
1997Rapid prototyping and rapid tooling - new developmentsArnold-Feret,
Barbara J.
1997Will fabricators provide the accuracy needed by toolmakers? Hastbacka,
Albin
1997Enhanced rapid prototyping for faster product development
processeKrause, F.-L.; Ciesla, M.; Stiel, Ch.; Ulbrich, A.
1997Study and experiment on solidified depth of photopolymer resin for
rapid prototyping Wang, Junjie; Liu, Tingzhang; Wang, Suqin; Lu, Bingheng
1998Thermomechanical Analysis of the laminated object manufacturing
processFazil Sonmez, Thomas Hahn
1998Improvements to the Stereolithography Calibration Process and Part
AccuracySteve Windsor
1998A Process Planning Method for Improving Build Performance in
StereolithographyA. West, DW Rosen
1998Influence of the Laser ystems on the Physical Properties of Parts
imaged Using StereolithographySuresh Jayanthi
1998Application of the Taguchi method and new hatch styles for quality
improvement in stereolithography Onuh, S.O.; Hon, K.K.B.
1998Method for assessing geometrical errors in layered manufacturing. Part
1: Error interaction and transfer mechanisms Liu, W.; Li, L.; Kochhar, A.K.
1998Optimizing build parameters for improved surface finish in
stereolithography Onuh, S.O.; Hon, K.K.B.
1998Rapid prototyping by free sintering method (1st report). Fundamental
study Nakazawa, H.; Ishikawa, M.; Matsumoto, Y
1998Research on improving rapid prototyping Wang, Zhiyan; Wang, Xinlong;
Liu, Shuang
1998Development of a CAD environment to determine the preferred build-up
direction for layered manufacturing Hur, Junghoon; Lee, Kunwoo
1999Rapid PatternMaker System AccuracySanders Design
1999Am interactive virtual system for simulation and optimization of rapid
prototypingSH Choi S. Samavedam
1999Benchmarking Rapid Tooling ProcessesJoseph Paxton
1999Benchmark Study of Accuracy and Surface Quality in RP ModelsMike
Shellabear
1999Die Cast Tooling from Rapid PrototypingHardro, Peter J. & Stucker, Brent
1999A Study of accuracy in Automated FabricationFarentinos, S. & Khoshnevis, B
1999Optimization of rapid prototypes with surface finish constraints: a
study on the FDM techniqueA. Armillotta, GF Biggioggero, M. Carnevale, M.
Monno
1999The Decision Dilemma Assessment and Selection of Rapid Prototyping
Process ChainsMüller, H. & Schimmel, A.
1999Quality Assurance in rapid prototyping in the process chain: CAD/CAM-
Stereolithography-Vacuum CastingR. Wich, A. Bernard, Djeapragache, G.
Tallilandier
1999Benchmarking Various Methods of Layered manufacturing Systems in Rapid
PrototypingK. Loose, T. Nakagawa
1999Optimal Parameter Settings to Overcome Linear Shrinkage of
Stereolithography PartsP. Manceau, W. Chen, S. Ahzi, G. Fadel
19993D visualization and modeling of the foot: Precision and accuracy
Robertson, Douglas D.; Smith, Kirk E.; Commean, Paul K.; Mueller, Michael
J.; Pilgram, Thomas
1999Part orientation in stereolithography Pham, D.T.; Dimov, S.S.; Gault, R.S.
20003D Printer Benchmarking ProjectJ. Almgren, Niel Hopkinson
2000Improvements to the Stereolithography Calibration Process and part
accuracySteve Windsor
2000Rapid Steel Part accuracyB Stucker
2000Benchmarking Rapid Prototyping Technology/ Process and Assessing its
Impact on New Product Development PerformanceAtul Mandal, Nagesh Murthy,
Lucent, Siemens, Motorola
20003D Printer Benchmarking ProjectAlmgren, J., Hopkinson, N.
2000Assessment of SLA Part AccuracySteve Windsor
2000Effects of random noise shrinkage on rapid tooling accuracy Jacobs, Paul
2000Parametric process optimization to improve the accuracy of rapid
prototyped stereolithography parts Zhou, Jack G.; Herscovici, Daniel; Chen,
Calvin C.
2000Part build orientations based on volumetric error in fused deposition
modellingMasood, S.H.; Rattanawong, W.; Iovenitti, P
2000Generating optimal slice data for layered manufacturingLee, K.H.; Choi, K
2000Improving surface quality of selective laser sintered rapid prototype
parts using robotic finishingShi, D.; Gibson, I.
2000Characterization of the laminated object manufacturing (LOM)
processPark, Joon; Tari, Michael J.; Hahn, H. Thomas
2000New practical adaptive slicing method for the SLP RP system to
accelerate fabrication speed without accuracy sacrificeJeng, Jeng-Ywan;
Wong, Yue-Seng; Li, Yun-Ho
High In-Plane Part AccuracyDr. Hans Langer
Standard Test Files for Benchmarking RP SystemsR. Smith
*******************************************************************
Opinions, suggestions, and other controversial matter VOID where prohibited.
Some are the best in their fields. Some are second-rate achievers.
But when the applause dies. Awards tarnish. Achievements are forgotten.
Accolades and certificates are buried with their owners.
******************************************************************
Elaine T. Hunt, Director elaine.hunt@ces.clemson.edu
Laboratory to Advance Industrial Prototyping
Clemson University 206 Fluor Daniel Bldg.
Clemson, SC 29634-0925
864-656-0321 (voice) 864-656-4435 (fax)
http://www.vr.clemson.edu/credo/persall/persall.html
http://www.vr.clemson.edu/credo/rp.html
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Fri Jan 04 2002 - 09:57:43 EET