All,
www.use-enco.com <http://www.use-enco.com> has a 36" bead blaster for $258
USD and that comes with a certificate for 50lbs of 60-100 grit material for
free! They have a table top unit for $198 USD and that comes with a
certificate for 25lbs of free material.
Karl
-----Original Message-----
From: Doug Groh [SMTP:douggroh@rapid.com]
Sent: Thursday, February 22, 2001 10:29 AM
To: Spangler, Michael S
Cc: 'rp-ml@ltk.hut.fi'
Subject: Re: Bead Blaster
There are numerous manufacturers out there, I have seen units that
run
as little as $400.00 and as much as $10,000.00. You have to decide
whatyou want. Search the archives. I did a search on the Alta vista
search engine, and found four rpml articles.
here is one of them
http://bart.lpt.fi/archives/rp-ml-1997/1644.html
Search the machinery distributors in your area. I would look at
Production Tool in my own area. You may have another tool and
Machinery
distributor in your area. I use glass beads in a trinco unit. You
can
look at their site here.
http://www.trinco.com/
Doug Groh
"Spangler, Michael S" wrote:
> Dear RPML,
>
> I am looking for a new Bead Blaster, we have a 250/50
> and would use it for our part finishing.
> If you have any sources or advice, I would appreciate it.
> such as what bead size, and type would work for a standard
> finish.
>
> Thank you in advance!
>
> Scott
>
> Michael S. Spangler Raytheon Technical
> Mechanical Engineer Services Company
> Stereolithography Engineering & Production
> Mechanical Design Support
> & Integration 6125 E. 21st st. (MS 43)
> (317) 306-2442 Indianapolis, Indiana
> (317) 306-2725 46219-2058
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This email message and any attachment(s) are for the sole use of the
intended recipient(s) and may contain proprietary and/or confidential
information which may be privileged or otherwise protected from disclosure.
Any unauthorized review, use, disclosure or distribution is prohibited. If
you are not the intended recipient(s), please contact the sender by reply
email and destroy the original message and any copies of the message as well
as any attachment(s) to the original message.
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Fri Jan 04 2002 - 09:56:53 EET