Dear Anton,
You can find some very nice pictures on the web-page of MCP-HEK GmbH,
together with an exampe of the process.
The link to that page is :
http://www.mcp-group.de/english/toolsstart.htm
I hope that helps. Good luck.
Stamatis
--------------------------------------------------------------
Stamatios N. Polydoras
Dipl. Mechanical Engineer NTUA
RP Lab Responsible Person - Research Associate NTUA
National Technical University of Athens - GREECE
A.gerrits@ind.tno.nl wrote:
> Dear list,
>
> Who can help me with some digital pictures of the spray metal tooling
> process.
>
> Either the process or a tooling example is fine.
>
> Hope that someone helps me out.
>
> Best regards,
>
> Anton Gerrits
>
> TNO Industrial Technology
> Department Industrial Prototyping
>
> P.O. Box 5073
> 2600 GB Delft (The Netherlands)
> Delft (+31) 015-26 08 729, fax (+31) 015-26 08 725
> Eindhoven (+31) 040-26 50 608, fax (+31) 040-26 50 590
> Mobile (+31) 06-23 11 53 97
> E-mail a.gerrits@ind.tno.nl <mailto:a.gerrits@ind.tno.nl>
>
> http://www.ind.tno.nl/en/productiondevelopment/prototyping/index.html
> <http://www.tno.nl/en/productiondevelopment/prototyping/index.html>
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:04:08 EEST