John
The Warwick Manufacturing Group (based at Warwick University) have a sand
sintering station.
Contact David Wimpenny or Chris Ryall (01203 524722).
Best Regards
Chris Lawrie
Delcam Plc
+44 (0)121 766 5544
-----Original Message-----
From: owner-rp-ml@bart.lpt.fi [mailto:owner-rp-ml@bart.lpt.fi]On Behalf
Of john_makuch@caradon.com
Sent: 10 July 2000 16:26
To: rp-ml@bart.lpt.fi
Subject: SLS Sand Cores.
Dear List,
Is there a company / bureau that has the capability to produce selective
laser
sintered sand cores. If so please mail a response or call me on 01242 -
282341
for further details. I am based in Cheltenham, Gloucestershire, England and
would prefer the supplier to be relatively local to me, if possible.
Thanks in anticipation
John.
THIS E-MAIL AND ANY ATTACHED FILES ARE CONFIDENTIAL, PROTECTED BY COPYRIGHT
AND
MAY BE LEGALLY PRIVILEGED. If you are not the intended addressee or have
received the e-mail in error, any use of this e-mail or any copying,
distribution or other dissemination of it is strictly prohibited. If you
have
received this transmission in error, please notify the sender immediately
and
then delete the e-mail. E-mail cannot be guaranteed to be secure, error free
or
free from viruses. Caradon does not accept any liability whatsoever for any
loss or damage which may be caused as a result of the transmission of this
message by e-mail. If verification is required, please request a hard copy
version.
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:49 EEST