Hello,
just wandering what you mean by rebubbling?
I don't operate the same machine but I'm interested in this term.
Sincerely,
Alex
> -----Original Message-----
> From: Tom Richards [mailto:tomr@aicasting.com]
> Sent: Monday, June 26, 2000 6:14 AM
> To: KDenton@williams-int.com
> Cc: rp-ml@bart.lpt.fi
> Subject: Re: A funny thing happened on the way to the RP lab....
>
>
> Glad to hear that your efforts were rewarded.
>
> I go through a standard setup procedure every time I run our
> Sanders, which
> pays dividends with smooth running. It's logical to check out
> ALL of the
> systems each time. It takes me an hour to two hours or
> sometimes more, but
> its worth it. By the time I've calibrated the jets the usual
> number of times
> and finally checked the deposited weights, the jets have
> settled-in, and it
> runs reliably. In my mind's eye, by then the polymer strings
> have alligned
> and constant fluid flow and machine running conditions have
> been established.
>
> I've been using service centers lately to build the
> transportable stuff.
> However, when I run here I interrupt at least each sixteen
> hours to top-off
> the tanks, rebubble the support jet (inportant on the MM6B), clean the
> cutter, lube, and observe that everything is OK. By the way,
> the rebubbling
> takes only about two minutes, but its KEY to its continued
> reliable operation.
>
>
> At 11:43 AM 6/24/00 -0400, you wrote:
>
> Yes, I said our Sanders MMII is producing
> >parts well so far it completed a build and I'll be
> submitting others to it
> >come Monday!
>
> Many of you may ask what
> >I did and to be honest I do not know! I striped the machine
> down to its
> >bare bones checked on all the contacts, tested cabling, and
> cleaned what
> >needed to be cleaned. Reformatted the hard drive and then
> reinstalled the
> >software and it started and completed a build like nothing
> was ever wrong!
>
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:44 EEST