RE: CNC and RP

From: j.gunnink@ind.tno.nl
Date: Thu Mar 30 2000 - 09:14:39 EEST


Dear Joe,

Take a look at our WEB-site:

http://www.ind.tno.nl/en/productiondevelopment/prototyping/index.html
<http://www.ind.tno.nl/en/productiondevelopment/prototyping/index.html>

and browse to Technology and then STL-technology. There you can download a
paper on using High Speed Milling in RP and RT processes with examples etc.
This will also be presented at the RP&M2000 Conference in Chicago on 11-4-00

You can also probably surf to the WEB-site of Delft Spline Systems:

www.deskproto.com <http://www.deskproto.com>

Over there you will also find info about using CNC in RP and RT.

Good Luck!

All the best from Holland and hope to see you all at the RP&M2000
conference!!!!!

Jan Willem

Jan Willem Gunnink
Project Manager
TNO Industrial Technology
Production Development Division
Department of Industrial Prototyping
P.O.Box 5073
2600 GB Delft
The Netherlands
Tel:+31-15-2608747 Fax:+31-15-2608725
E-mail: j.gunnink@ind.tno.nl <mailto:j.gunnink@ind.tno.nl>

This E-mail is printed with 100% recycable pixels.

Visit us at:
http://www.ind.tno.nl/en/productiondevelopment/prototyping/index.html
<http://www.ind.tno.nl/en/productiondevelopment/prototyping/index.html>

        -----Oorspronkelijk bericht-----
        Van: Joe Bertoletti [SMTP:jpb233@psu.edu]
        Verzonden: woensdag 29 maart 2000 17:13
        Aan: rp-ml@bart.lpt.fi
        Onderwerp: CNC and RP

        Hi,
        I have a class project and i am supposed to do a presentation
talking about
        Rapid prototyping using CNC machines. Any leads on journals or
        applications would be great.
         
        Thanks
        Joe

        For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:09 EEST