I was thinking more on the order of sintering the chocolate powder using the
laser, directly :) Not necessarily to eat it, more as a cheap and very
plentiful SLS material. Hehe.
Mmmmm..
Robin
> -----Original Message-----
> From: owner-rp-ml@bart.lpt.fi [mailto:owner-rp-ml@bart.lpt.fi]On Behalf
> Of Jorge Baquero
> Sent: March 23, 2000 3:22 PM
> To: 'Marshall Burns'; Eifert, Dan; 'Robin Stoddart'; rp-ml@bart.lpt.fi
> Subject: chocolates
>
>
> Dear List,
>
> Recently I experimented making chocolates with organic shapes using the
> FreeForm modeling system. I printed a thermojet master from the STL file,
> made a silicone production mold out of it and casted the chocolate inside.
> In the future I plan to make a thermoform mold instead of the
> silicone. You
> can see the pictures of the process at: http://www.sensable.com/molds
>
> Jorge
> Jbaquero@sensable.com
> Product Quality Specialist
> Sensable Technologies
>
>
>
>
>
>
>
>
>
> -----Original Message-----
> From: Marshall Burns [mailto:Marshall@Ennex.com]
> Sent: Tuesday, March 21, 2000 11:30 AM
> To: Eifert, Dan; 'Robin Stoddart'; rp-ml@bart.lpt.fi
> Subject: Fabbing chocolate
>
>
> > I've been listening to this list for the past 10 months and FINALLY
> > someone has REALLY hit on a practical use for this technology!
> > Custom chocolate sculptures!
>
> Dan,
>
> A little over a year ago, there was an extensive debate on the RP-ML
> about fabbing chocolate sculputes and other edible applications. See
> http://www.ennex.com/fabbers/RP-ML/food.sht for a collection of
> the messages
> on this subject.
>
> Best regards,
> Marshall Burns
> President, Ennex Corporation
>
> Marshall@Ennex.com
> Los Angeles, USA, (310) 397-1314
> http://www.Ennex.com
>
>
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:07 EEST