Does anyone know anything about the build times for this machine in
comparison to a Z-Corp or Thermojet printer? With these stated layer
thickness', I'm afraid the build times would be extremely long in
comparison.
Any info would be greatly appreciated,
David Grelewicz
Design Engineering Manager
Nike, Inc
-----Original Message-----
From: Terry T. Wohlers [mailto:twohlers@compuserve.com]
Sent: Thursday, March 23, 2000 11:47 AM
To: Mitchell, Douglas (D.B.)
Cc: RP-ML
Subject: RE: Objet
Message text written by "Mitchell, Douglas (D.B.)"
>Is that a typo, or will it actually give a 0.0008 inch layer thickness?<
Doug,
This is correct. The machine is capable of 0.0004 inch (10 micron) layers,
but they are currently buidling 0.0008 inch (20 micron) layers to minimize
the time it takes to slice and process the data.
Terry
**********
Terry Wohlers
Wohlers Associates, Inc.
OakRidge Business Park
1511 River Oak Drive
Fort Collins, Colorado 80525 USA
970-225-0086
Fax 970-225-2027
twohlers@compuserve.com
www.WohlersAssociates.com
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:06 EEST