RE: Discover Magazine Article

From: KDenton@williams-int.com
Date: Mon Feb 21 2000 - 23:32:49 EET


Thanks David!

        -----Original Message-----
        From: David K. Leigh [SMTP:dkleigh@harvest-tech.com]
        Sent: Monday, February 21, 2000 4:29 PM
        To: KDenton@williams-int.com; AHastbacka@aol.com;
rp-ml@bart.lpt.fi
        Subject: Re: Discover Magazine Article

        Go to http://www.discover.com and select "Current Issue." Under the
tech
        article at the bottom is one on 3-D fax.

        ****************************************************
        David K. Leigh ph(254) 933-1000
        Harvest Technologies fax(254) 298-0125
        dkleigh@harvest-tech.com

        From: <KDenton@williams-int.com>
        To: <AHastbacka@aol.com>; <rp-ml@bart.lpt.fi>
        Sent: Monday, February 21, 2000 2:24 PM
        Subject: RE: Discover Magazine Article

> I could not get the link provided by Al to work but did get this
one to:
>
> http://www.discover.com/feb_00/gthere.html?article=featbeauty.html
>
> Karl
>
> -----Original Message-----
> From: AHastbacka@aol.com [SMTP:AHastbacka@aol.com]
> Sent: Monday, February 21, 2000 2:21 PM
> To: rp-ml@bart.lpt.fi
> Subject: Discover Magazine Article
>
> The February Discover Magazine has a good PR type of article on
> rapid
> prototyping. You can also see it on the net if you go to
>
> http://www.discover.com/feb_00_/feat3dfax.html.
>
> Regards,
> Al Hastbacka
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:02:52 EEST