it's been a while since i networked my 250 to my nt box. if i remember right, i
had to set up a user and direct him to a certain directory. i dump my build
files into that directory. then from the 250, i ftp to my nt box and use the
login i set up. i then just suck the files over to the 250. although, i can't
remember where or how i set up that user.
maybe that helps a little.
happy thanksgiving all,
todd
Vince Jesus wrote:
> With Lightyear as the new STL processing software, how are users of 190/250
> networking their build station to the NT station? (Just because I work for
> MS doesn't mean I have the answer. I am in the Hardware Division)
> This is what we presently do.
> We swap autoexec files for networking to our system. Lan Manager gets loaded
> and it connects to our network, (we use DCHP so that there isn't a static IP
> address on the NT box) After we load the files we then swap the autoexec
> files and load the standard one and reboot. The reason we remove the lan
> Manager is the hi-mem gets maxed out and the build will usually stop at
> about 4 passes.
>
> I have talked with our sales rep as well as the Application Engineer about
> bringing this up with corporate. They basically say that it is not a
> priority, but if they are to continue selling the slasmart package and light
> year. There has to be a better solution, like making the build station run
> on another OS.
>
> My 2cents.
>
> Can we buy replacement bulbs for the UV oven other than from 3d?
>
> Thanks for any info.
>
> Vince Jesus
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
-- Todd Reese Realize, Inc. 12999 Parkside Drive Fishers, IN 46038 Phone: (317) 915-0295 Fax/Modem: (317) 915-0296 Website: www.realizeinc.com Email: todd.reese@realizeinc.comFor more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:53:33 EEST