Whoowee! Ok, ok, I have got enough people willing to quote!
Thanks everyone, I apologize for my sloppy typing in advance to all those
who received replies.
B. J. Arnold-Feret
ppsltd@airmail.net
PaRTS
-----Original Message-----
From: B. J. Arnold-Feret <ppsltd@airmail.net>
To: RP-ML <rp-ml@bart.lpt.fi>
Date: Wednesday, November 03, 1999 2:21 PM
Subject: need prototype molders
>I have a part that is approx. 9.5 inches long, 1 inch high at the highest
>point, and should be able to go with a mold that is a straight pull. The
>customer wants the part made from Delrin, if possible glass filled Delrin,
>in volumes of 125 to 150 pieces total. The material must be Delrin, the
>part must be injection molded, and the tolerances are typical for the
>process. Cosmetics are not a concern.
>
>I have a 2D print, Pro/E database or IGES file available.
>
>Anyone willing to take a shot at it?
>
>B. J. Arnold-Feret
>ppsltd@airmail.net
>PaRTS
>Ft. Worth TX
>817-379-5629
>
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:53:18 EEST