Dear toolers and mailers,
We've discussed this topic many times, but the process is still not at its
best so I would like some further feedback on this:
I know about most IGES to STL converters and IGES-fixers, stand alone as
well as modules of big CAD-packages. And they all promise wonders of course!
That's why I would very much like to know the experience of other users:
What package do you use to generate STL files from a surface or solid model
and are you satisfied? If you have a little more time: What is the quality
of the generated stl-files (overlapping, thin, reversed triangles etc?)
Same question for IGES fixers?
Best regards and have a nice weekend,
Bart Kooijmans
Ing. N.M.J.P. Kooijmans.
Prototyping / Tooling Engineer
Production Development Division
Oostsingle 209, P.O. Box 5073
2600 GB Delft, the Netherlands
Phone: +31 15 2608 729
E-mail: B.Kooijmans@ind.tno.nl
Fax: +31 15 2608 725
Visit TNO at: http://www.tno.nl/instit/indus/prototyping/
<http://www.tno.nl/instit/indus/prototyping/>
-------Netherlands Organisation for Applied Scientific Research-------
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:53:08 EEST