Rapid Tool Question

From: Kevin Liles (kevin@lilesk.freeserve.co.uk)
Date: Fri May 21 1999 - 17:25:42 EEST

Next message: Nick Osborn: "Re: Rapid Tool Question"
Previous message: Dan R.: "Re: Technical Magazines"
Next in thread: Nick Osborn: "Re: Rapid Tool Question"
Maybe reply: Nick Osborn: "Re: Rapid Tool Question"
Maybe reply: Fusioneng@aol.com: "Re: Rapid Tool Question"
Reply: Wolfram Oldörp: "Re: Rapid Tool Question"
Reply: Cary Rosenberg: "Re: Rapid Tool Question"
Maybe reply: Jim Williams: "RE: Rapid Tool Question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Dear list,
I have a client who is interested in using a Rapid Tool in a press. The tool size will be around 250x250x100mm (10x10x4" for our friends in the US) and the force the tool will be subjected to is 1,400 tons.
Does anyone know if Keltool or Rapidsteel will withstand this sort of load?
Apart from machining, are there any other methods for creating a tool of this size and strength?

Best Regards,
Kevin Liles

Advanced 3D Solutions

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

Next message: Nick Osborn: "Re: Rapid Tool Question"
Previous message: Dan R.: "Re: Technical Magazines"
Next in thread: Nick Osborn: "Re: Rapid Tool Question"
Maybe reply: Nick Osborn: "Re: Rapid Tool Question"
Maybe reply: Fusioneng@aol.com: "Re: Rapid Tool Question"
Reply: Wolfram Oldörp: "Re: Rapid Tool Question"
Reply: Cary Rosenberg: "Re: Rapid Tool Question"
Maybe reply: Jim Williams: "RE: Rapid Tool Question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:51:45 EEST