>... you quickly run into resolution problems with features like a
>1/4-20 thread. the beauty of sls, though, is that it machines so well.
> so, save the hassle, not to mention the cad time to create the thread in
>the first place, and just drill and tap that sucker.
Will,
Wouldn't it be better to include at least the hole geometry in the CAD
design so the fabricator can create the object with the hole in the right
position and orientation? Then tapping can easily add the thread. If you do
both drilling and tapping manually, you are making the process of making the
object much more difficult and skill-intensive.
Marshall
*****************************************************************
Marshall Burns, President
Ennex(TM) Corporation
Fabbing the Future(TM)
10911 Weyburn Avenue, Suite 332, Los Angeles, U.S.A. 90024
Phone: +1 (310) 824-8700. Fax: +1 (310) 824-5185
E-mail: fabbers@Ennex.com. Web site: http://www.Ennex.com
*****************************************************************
***** Copyright (c) 1999, Ennex Corporation
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:51:20 EEST