My experience indicates that it is not necessary to cut the entire top off of
the can. Simply cut the plastic pour spout off and set the can out in the sun
for a couple of days. Enough light enters through the hole in the top of the
can to thoroughly polymerize the remaining resin in the can.
Ken Miller
Miller Technologies
395 S. 1100 W.
Farmington, UT 84025
(801) 451-7997
foamcaster@aol.com
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:51:14 EEST