Re: new technology

From: Joe Allison (Joe@SolidConcepts.com)
Date: Sat Jan 16 1999 - 00:12:49 EET


Elaine,

Did you write this or copy from somewhere else? It doesn't seem to be up to
your normal level of clarity. In fact, I can hardly understand it.

Who is Cockroft, a person or a company? Is Cockroft the developer of some
new technology or are they just evaluating it? In which case, who's
technology is this?

At 03:36 PM 1/15/99 -0500, you wrote:
>Cockroft will evaluate a low cost high speed, high resolution hybrid
>resin for rapid prototyping (RP). In polymer-based RP systems, the laser
>subsystem is the major bottleneck in throughput and is the principal
>cost driver. Twin innovations will serve to minimize these effects: (1)
>a novel resin system that cures upon exposure to infrared (IR) radiation;
>and (2) replacement of a single-beam UV laser with an inexpensive
>linear array of IR lasers having tens of thousands of emitters. Instead of
> a flying spot driven by a modulator and deflection mirrors, a linear
>array can be shuttled across the work surface, completing one layer per
>sweep. Instead of varying the dwell time to control shrinkage, the output
>intensity of individual emitters will be variably controlled. Potential
>commercial applications include all present and future polymer-based
>rapid prototyping systems. Markets include new equipment sales, retrofits
>to existing systems, and after market sales of resin and replacement
>parts. Instead of employing a $100,000 UV laser with a lifetime less
>than 5,000 hours, one IR array with a lifetime in excess of 100,000 hours
>can be employed at only slightly greater expense. The net result is a
>significant reduction in subsystem complexity and cost of ownership,
>coupled with order of magnitude increases in throughput and reliability.
>*******************************************************************
>Opinions, suggestions, and other controversial matter VOID where prohibited.
>******************************************************************
>Elaine T. Hunt, Director
>Clemson University Laboratory to Advance Industrial Prototyping
>206 Fluor Daniel Bldg. Clemson, SC 29643-0925
>864-656-0321 (voice) 864-656-4435 (fax)
>elaine.hunt@ces.clemson.edu
>http://chip.eng.clemson.edu/rp/persall/elaine.html
>
>
>
>For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
>
Joe Allison
Solid Concepts Inc.
28231 Avenue Crocker #10
Valencia, CA 91355
Tel: (805) 257-9300
Fax: (805) 257-9311
Email: Joe@SolidConcepts.com

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:50:46 EEST