Re: machining from .stl files

From: Jim Vander Linden (jim.vanderlinden@carpediem.com)
Date: Sat Oct 17 1998 - 01:05:16 EEST

Next message: Steve_Farentinos: "Re: machining from .stl files"
Previous message: Jarvela: "machining from .stl files"
In reply to: Jarvela: "machining from .stl files"
Next in thread: Steve_Farentinos: "Re: machining from .stl files"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Jarvela wrote:
>
> What is the best method to create machine code from .stl files. I've
> considered converting the .stl file to an iges file and import into a
> cad/cam package such as pro e and go from there. Any better
> suggestions?
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

Cimitrom reads in STL files direct.

Jim

-- Jim Vander Linden Rapid Prototyping jim.vanderlinden@carpediem.com Compression, Inc. 3449 Sky Park Blvd. Eau Claire, WI 54701, USA Ph. 715-834-6800 Fax 715-834-7809

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

Next message: Steve_Farentinos: "Re: machining from .stl files"
Previous message: Jarvela: "machining from .stl files"
In reply to: Jarvela: "machining from .stl files"
Next in thread: Steve_Farentinos: "Re: machining from .stl files"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:46:55 EEST