This one needed a push...
RD
---------- Forwarded message ----------
Date: Fri, 24 Apr 1998 15:03:14 -0400
To: rp-ml@bart.lpt.fi
From: john durden <durden@atl.mindspring.com>
Subject: help
Dear List,
We have been asked by one of our customers to
build a plastics injection mold. That's our business, so
normally this wouldn't present a problem. The catch,
here, is that the only data available is a hand-carved,
full-scale model of the part. The object is of a sculptured,
multi-faceted, free-form geometry that does not lend
itself to modeling in a cad package such as Pro/E.
Casting directly from the model might be an option, however,
the cavity blocks would be approximately 11" x 7" x 2", so
we have ruled out Kel-Tool.
The best option for us would be to have the model scanned
into some sort of a surface model that we could output to our
machining center.
Can someone on this list tell me the best way to approach
this; or, better yet, scan the object into a useable surface
model (for a fee, of course).
Thanks for your help.
John Durden
Durden Plastics
durden@mindspring.com
Phone:770-963-0637
Fax: 770-995-7067
For more information about the rp-ml see: http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:45:24 EEST