dear FDM users,
pls find attached reply from Stratasys Inc. support personnel.
Sincerely,
joseph sim
----------
From: strata@stratasys.com
To: Innomation Systems & Technologies Pte Ltd <istpl@singnet.com.sg>
Subject: Re: (Archive Copy) Fw: FDM borders (fwd)
Date: Monday, February 09, 1998 9:12 AM
Hello Joseph,
You are correct with your diagnosis.
Sujit Pal
Stratasys Inc, (INDIA)
*******************************************************************
Diagnosis starts here!
*****************************************************************
From: "Innomation Systems & Technologies Pte Ltd"
<istpl@singnet.com.sg>
To: <rp-ml@bart.lpt.fi>
Cc: <support@stratasys.com>
Subject: (Archive Copy) Fw: FDM borders (fwd)
Date: Mon, 9 Feb 1998 09:02:01 -0000
dear FDM users,
i am joseph sim from IST...the FDM vendor in Singapore.
i will try to veify my diagnosis with the Stratasys experts....but we have
never come across this problem(layer do not fuse together) before. the
only time we see that the "layers do not fuse" is when there are not enough
supports created in the required regions. if they are using QuickSlice
minimal support building option this could be a problem.
what i can suggest is to use maximum or optimal support building option
rather than minimal.
Sincerely,
joseph sim
> > > From: Drew Brown <conreality@greatid.com>
> > > To: rp-ml@bart.lpt.fi
> > > Subject: FDM borders
> > >
> > > Has anyone had any difficulties with FDM borders not completely
fusing to
> > the previous layer on sloped,
> > > unsupported walls? This problem causes the part walls to look
rippled. If
> > anyone has any suggestions to
> > > correct this problem it would be greatly appreciated. We are running
an
> > FDM1650 in ABS.
> > >
> > > Thanks in advanced.
> > >
> > > Drew Brown
> > > Conceptual Reality L.L.C.
> > > Phone:(248)926-8820
> > > Fax:(248)926-8830
> > > http://www.conceptual-reality.com
> > >
> > > For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
> >
> > For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
> >
> >
> >
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:44:52 EEST