Injection molds
From:
Yakov Horenstein (Electon)
Date:
Wednesday, November 23, 1994
From: Yakov Horenstein (Electon)
To: RP-ML
Date: Wednesday, November 23, 1994
Subject: Injection molds
Greetings everyone,
For a RP service bureau in Italy, we need the following information
about methods and materials for producing cast resin thermoplastic
injection moulds. If these are not industrial secrets post them here,
otherwise a private email message will be gratefully accepted.
1) Specifics of the method used
2) Specifics on the materials, e.g. up to 90% metal filled epoxy resins
3) Details of polyurethane casting resins with high deflective temps
e.g. > 100!C; >150!C; > 200!C
4) Costs, with names and addresses of suppliers if possible
Thanks in advance.
Yakov
Previous message
| Next message
Back to 1994 index